Author: KermMartian
Posted: 15 Nov 2012 09:34:55 pm (GMT -5)
It's hard. I usually strip a little of the trace, solder on a 30-awg wire, find a place on the other side of the discontinuity, and connect the other end. The hard part is often cutting a nick in the edge of the board to pass the wire from front to back.
_________________
![]()
![]()
![]()
![]()
![]()
![]()
Posted: 15 Nov 2012 09:34:55 pm (GMT -5)
It's hard. I usually strip a little of the trace, solder on a 30-awg wire, find a place on the other side of the discontinuity, and connect the other end. The hard part is often cutting a nick in the edge of the board to pass the wire from front to back.
_________________
