Author: Scorpidoclove
Subject: Programs for Trig
Posted: 25 Dec 2012 12:37:38 am (GMT -5)
Hello all, I'm new to this but here we go. Recently I have posted some program ( FLATS, CORDS, PRO2, BOLTHOLE, and OBLIQUE ) into Archives. These programs will help alot if your a Machinist or into working alot of trig math.
The program Flats will allow you to input the number of sides you want (square, hex, octagon etc) you can then enter the length of the sides or input the diameter you want it to make. Which ever you choose it will give you the other.
CORDS is a program that will allow you to input what you know about a cord and it will solve the rest for you, (arc, length, angle, height from cord to arc).
PRO2 is a program for solving Right Triangles. You input any 2 knowns ( 2 sides, or 1 side and 1 angle) and it will solve the rest for you and display the values.
BOLTHOLE program allows you to input the diameter you want the bolt hole pattern to be and the number of points (holes) and the angle you want the pattern you want the program to start from. From there it will give you the x and y coords for each of the points in order counter-clockwise.
And last but not lest the program OBLIQUE is for solving Oblique triangles. For this one you need to know any 3 knowns for it to solve the rest for you. ( 3 sides, 2 sides and 1 angle, or 2 angles and 1 side).
For any of these programs for any value you don't know you input a "0" zero for that value and press enter to continue the program. I hope you all like them and I welcome remarks. These were my first programs to make.
Subject: Programs for Trig
Posted: 25 Dec 2012 12:37:38 am (GMT -5)
Hello all, I'm new to this but here we go. Recently I have posted some program ( FLATS, CORDS, PRO2, BOLTHOLE, and OBLIQUE ) into Archives. These programs will help alot if your a Machinist or into working alot of trig math.
The program Flats will allow you to input the number of sides you want (square, hex, octagon etc) you can then enter the length of the sides or input the diameter you want it to make. Which ever you choose it will give you the other.
CORDS is a program that will allow you to input what you know about a cord and it will solve the rest for you, (arc, length, angle, height from cord to arc).
PRO2 is a program for solving Right Triangles. You input any 2 knowns ( 2 sides, or 1 side and 1 angle) and it will solve the rest for you and display the values.
BOLTHOLE program allows you to input the diameter you want the bolt hole pattern to be and the number of points (holes) and the angle you want the pattern you want the program to start from. From there it will give you the x and y coords for each of the points in order counter-clockwise.
And last but not lest the program OBLIQUE is for solving Oblique triangles. For this one you need to know any 3 knowns for it to solve the rest for you. ( 3 sides, 2 sides and 1 angle, or 2 angles and 1 side).
For any of these programs for any value you don't know you input a "0" zero for that value and press enter to continue the program. I hope you all like them and I welcome remarks. These were my first programs to make.